Compact Brewhouse BHM 250 / BHM 500
Single-temperature infusion mashing
Multi-step infusion mashing
Decoction mashing
Design:
- Monoblock design, mounted on a stainless steel frame
- Two-vessel brewhouse (mash mixer-lauter tun and kettle-whirlpool)
- Completely piped and wired
- Touch screen control panel
- Both vessels equipped with thermal oil heated bottom and jacket, insulated (option - steam heating)
Sanitary design:
- TIG welding
- Laser welded pillow-plates, orbital welded pipes
- Automated grinding and polishing of welds and surfaces
- Certified materials
User friendly:
- Versatile process
- Master brew interface control system
- Manual control (pump on/off, flow regulation, temperature control)
- Oganized manifold system easy accessible from the front
- Easy cleaning
Construction
| Main components | |
|---|---|
| 1 | Mash mixer (MM) / Lauter tun (LT) |
| 2 | Kettle (K) / Whirlpool (W) |
| A | Heat exchanger |
| B | Pump |
| C | Control and operating panel |
| D | Manifold with butterfly process valves |
| E | Integrated oil heater with pump |
| F | Inlet for decoction mashing (option) |
| G | Rake plow with motor (adjustable rotating speed) |
| Brewhouse mini | BHM 250 | BHM 500 | |
|---|---|---|---|
| MM/LT volume (1) | L | 265 | 530 |
| K/W volume (2) | L | 345 | 675 |
| MM/LT diameter (D1) | mm | 764 | 1040 |
| K/W diameter (D2) | mm | 874 | 1185 |
| Height (H1) | mm | 1304 | 1337 |
| Height (H2) | mm | 1304 | 1337 |
| Total height (H3) | mm | 1940 | 1955 |
| Total length (L) | mm | 2360 | 2880 |
| Total width (W) | mm | 1300 | 1480 |
| Electric power | kW | 20 | 38 |
gallery
Photos of the production
certificates
The quality of our equipment is documented:
- management and control, planning, production, sales and environmental management are regulated according to the ISO9001 and ISO14001 standards;
- requirements of our customers, general rules of the profession and good engineering and manufacturing practice are respected;
- TÜV certificate confirms compliance with the requirements of the EN ISO 3834-2 standard;
- conditions for the production of pressure vessels according to AD 2000 Merkblatt HP0 in HP 100 R, in combination with EN ISO 3834-2 are satisfied;
- planning and production of pressure vessels according to the Directive 97/23/EC (PED, Module H/H1) is supervised by the notified body for the conformity assessment (TÜV, CE 0531).
